Sony WH-XB910N review

The Sony Extra Bass line of headphones has been a mainstay for a couple of decades, and generally speaking, Sony holds up its end of the bargain by supplying a lot of bass. This is great for bass heads, but what about the rest of us? We tested the Sony WH-XB910N for two weeks to see how it performs, and there are plenty of other features that could draw you in. Maybe this active noise cancelling (ANC) headset is a sleeper hit with the right EQ.

  • Bass heads will be pleased with the default frequency response, as well as a few variations on bass emphasis in the EQ presets.
  • People looking for noise cancelling headphones with an optional hardwired connection will like the flexibility of the WH-XB910N.
  • Anyone looking for a cheaper alternative to premium noise cancelling headphones will like the performance for the price, if they don’t mind doing some EQ.

What is it like to use the Sony WH-XB910N?

Looking quite a bit like the flagship WH-1000XM4 and XM3 before it, along with its sibling the WH-XB900N, the latest WH-XB910N won’t win any awards for aesthetic innovations. With that said, it looks stealthy and discreet, save for the raised grey Sony logos adorning each side of the headband—keeping it to just one side might’ve looked nicer. Our test model is the black colorway, or you can grab navy. The housing is comprised entirely of plastic with vinyl for the ear pad covers, and the ear cups flip up toward the headband for storage. Sometimes I pinch my fingers when releasing the headphone hinges, and Sony thought of everything; buried in small text in the warning section it says to watch your finger.

The Sony WH-XB910N is partially folded into its open case, showing the cables.The case has room for the world’s shortest USB-C charging cable and a 1.2m long headphone cable.

Weighing 252g the WH-XB910N feels comfortable and the ear padding has generous space for most at approximately (65mm x 40mm) to fit your ears. Inside the housing sits a 40mm dynamic driver, typical for over ear headphones. Clamping force rates as sufficient for keeping the headphones secure, but not glued on tight. When I eat while wearing the headphones, the pressure can hit a painful nerve where my jaw meets my neck just below the ear lobe. It’s not a problem at all if I avoid eating while wearing the headset though.

The package includes a zip carry case made of fabric and a thin semi hard-shell. It’s good enough to stow away the headset and save it from scrapes, but it won’t save the WH-XB910N from crushing under any weight. You also get a USB-C cable, and a 1.2m headphone cable terminating in a 3.5mm jack with the WH-XB910N, meaning you have some flexibility between wireless and wired listening.

How do you control the Sony WH-XB910N?

Action Function
Swipe up

Volume up

Swipe down

Volume down

Swipe forward

Track forward

Swipe back

Track back

Hold (center)

Voice assistant

Double tap center

Pause / resume

Cup hand

Ambient sound passthrough

To control the headset, you need to memorize a combination of touch controls for the right ear cup housing, and tactile button commands on the underside of the left ear cup.

Single press Hold (2s) Hold (5s)

Single press

  • Cycle through listening modes

Hold (2s) Hold (5s)


Hold (2s) Hold (5s)

  • Bluetooth pairing, must being from powered off mode

The touch controls seem like a great idea, but the touch panel’s sensitivity is all over the place. Sometimes it registers my commands and other times it’s like I never touched it. To adjust the volume, you basically draw a line on the flat of the right ear cup housing, up or downwards. Sometimes the WH-XB910N interprets my gesture as a skip forward command—pretty annoying. It’s easier to just use my device volume control. Skip forward and skip back work more predictably, and while pause works, play doesn’t always work.

Shot from the side to show the Sony WH-XB910N controls on the left ear cup.Power on/off and ANC/Ambient are the two buttons on the left ear cup. These work just fine.

I also accidentally trigger the virtual assistant (press and hold on the pad) any time I put the headphones on or take them off. Luckily you can turn that off in the app. Cupping your hand over the right ear cup temporarily switches your headset into Ambient mode. This is one of the best quick mode switches I’ve experienced because, in a moment when someone says something to you, it’s easier to cup your hand over the ear cup than to reach for a button you have to recall by muscle memory.

When you first get the WH-XB910N and turn it on (by pressing the power button) it’ll automatically enter pairing mode. It indicates this by flashing the blue LED twice rapidly. In contrast, if it’s just on and not in pairing mode it’ll flash blue at a steady interval. Sony could have made this clearer by having the LED flash blue and orange. From here it should show up in your Bluetooth settings, select it, and a prompt to download the Sony Headphones Connect app appears.

Now, if for some reason yours doesn’t enter Bluetooth pairing mode fresh from the box, or you want to connect to a different device, you have to enter pairing mode from power off. If you try to enter pairing mode when the WH-XB910N is already turned on, you’ll just end up turning off the headset. This is frustrating, especially when Sony does little to make it obvious you have to do this immediately when you power on, but it seems to be a trending pairing method.

  • With the headphones turned off press and hold the power button.
  • Continue to hold the power button longer than you would normally to just turn it on, about 5 seconds.
  • Notice the LED light next to the button begin to rapidly flash blue in couplets. Now you’re in pairing mode, let go of the power button.
  • Select the device as you normally would in your Bluetooth settings, or if you have the Sony Headphones Connect app already, you can find it there as well.

Should you download the Sony Headphones Connect app?

two screenshots show an EQ preset and some system settings you can change for the Sony WH-XB910N.As you can see the equalizer is limited, but you can customize a few other functions in Settings too.

Yes, you should definitely download the accompanying Headphones Connect app (iOS/Android). Immediately after connecting to my device, the app initiates a 35-minute update to version 1.2.2. You can adjust touch commands, use 360 Reality Audio (surround sound), adjust noise cancelling (including Wind Noise Reduction), and access my favorite, an equalizer.

What’s Adaptive Sound?

Three screenshots show various settings for Adaptive Sound in the Headphones Connect app for Sony WH-XB910N.It’s a cool idea, but requires a lot of permissions, and could do with slightly cleaner user interface.

The term Adaptive Sound has been used with various definitions by different companies. Google uses the term for the Pixel Buds A-Series to mean the audio automatically adjusts in relation to your environmental noise. Sony means that if you give a lot of location permissions it’ll study your habits and determine which settings, such as Ambient or ANC, you usually want.

It works similarly to the Sound Zones Sennheiser has for the MOMENTUM True Wireless 3, although, a little more clunky in execution. If you enable the feature you also end up with a constant notification that Adaptive Sound is on. I don’t mind the notification if it disappears, but this one sticks around.

Three screenshots show the set up process for the 360 Reality Audio for Sony WH-XB910N.Get ready to send Sony selfies for the surround sound.

First off, keep in mind that 360 Reality Audio is limited to the following services: 360 by Deezer, Amazon Music, Artist Connection,, PeerTracks, and Tidal. Using the Headphones Connect app, you open the “Analyze ear shape” tab under the 360 Reality Audio Setup header. Here you take photos of each ear and yourself head on.

Once you’ve had your ears analyzed and have a compatible service on your device, tap “Optimize” and it’ll initiate a walkthrough. Sample audio will play for you to hear the difference between standard stereo and surround sound. In the case of Deezer, you have to download a separate 360 Audio app to listen to music in surround sound, which seems a bit tacked on. Who wants to open a different app to listen to 360 Reality Audio, other than normal Deezer?

As it stands, the selections compatible with Sony 360 Reality Audio are so limited that in the 360 Audio app for Deezer, you can’t actually search. Instead, you have to stick to recommendations on the home page, or scroll through an alphabetized list of artists. Unsurprisingly, most of these artists are pretty mainstream, or least Sony artists. I find a handful of tracks to my taste, like Up Granville by Peach Pit. The surround sound is a neat trick, better implemented on some songs than on others. It seems more like a novelty at this point, but I’m sure people said the same of stereo mixes when mono was de rigeur.

What Bluetooth codecs does the Sony WH-XB910N support?

Close up image of the Sony WH-XB910N propped up in its case with the ear cups folded flat.Touch controls are on the flat of the right ear cup housing.

Onboard the WH-XB910N, Sony supplies the usual AAC and SBC Bluetooth codec support. For Android users, there’s also LDAC support to access better quality audio than AAC or SBC (on Android). By default, the WH-XB910N runs on AAC with my Samsung Galaxy Z Flip3. The Sony Headphones Connect app allows you to prioritize connection stability or audio quality. For whatever reason, both settings result in an AAC Bluetooth codec connection. Going through my phone’s Developer options menu, I can manually switch to LDAC for music playback but in the app, I cannot get LDAC to work: it flashes as LDAC briefly and then settles on AAC.

There’s nothing wrong with AAC per se, but LDAC is preferable for Android devices, whereas Apple users will get the best results from AAC. But as you’ve read before: the headphone jack is still the best choice for audio quality.

Screenshots show how to fix volume issue on google pixel buds a-series.Yours may differ slightly, but this is what Developer options looks like.

Your Android settings may look a little different, but the gist of accessing Developer settings is to:

  1. Go to Settings
  2. Go to About phone
  3. Tap on where it says “Build number” seven times
  4. Tap the back arrow
  5. Go to System & updates
  6. Scroll down and select “Developer options”
  7. Enable the “Developer options” toggle
  8. Now, tap to open Developer options menu found in Settings
  9. Scroll to Bluetooth audio codec.
  10. Tap Bluetooth audio codec and select LDAC

How long does the Sony WH-XB910N battery last?

Our standardized battery testing with ANC on shows the WH-XB910N lasts 37 hours, 9 minutes. This result is very good, and Sony suggests the headset can reach 50 hours without ANC powered on. The headset also has a 10-minute quick charge feature, yielding four and a half hours of audio, though Sony does not specify if that’s with or without ANC. It charges via USB-C, but if you’re in a jam with a dead headset, use that headphone jack.

How well does the Sony WH-XB910N cancel noise?

The isolation and ANC performance of the Sony WH-XB910N as shown in a chart.The WH-XB910N cancels noise effectively, though the occasional super-low rumble might sneak through, the performance is pretty comprehensive across the frequency spectrum.

A few years ago the ANC and isolation performance on the WH-XB910N would have been flagship worthy. In fact, the ANC is similar to the elderly (in tech years) Sony WH-1000XM3. In other words, the WH-XB910N attenuates bassy noises at 100Hz by over 20dB, rendering them one-quarter their loudness. This ANC tapers off pretty quickly in sub-bass frequencies, but it’s still very much a respectable effort for a mid-tier headset.

Meanwhile, the WH-XB910N passive isolation does a very good job at attenuating high frequencies, and 8kHz frequencies are one-sixteenth as loud as they’d sound without the headset on. Typically, isolation does the heavy lifting for high-pitched incidental sounds, while ANC acts best at filtering out repetitive low sounds like air conditioner units.

Transparency mode, Ambient Aware, Ambient Sound, or Awareness mode (companies have a lot of different names for the same thing) all use mics to pipe in the sounds of your environment. The purpose is to keep you aware, say if someone talks to you while you’re listening to music. It can be quicker than hitting pause and removing your headphones.

How does the Sony WH-XB910N sound?

This frequency response chart of the Sony WH-XB910N shows a significantly exaggerated bass and under-emphasized mids.Sony WH-XB910N (cyan) comes in hot with a 20dB exaggeration at 40Hz, compared to our target curve (pink).

Unsurprisingly, the headphones called “Extra Bass” do sound bassy. Below 200Hz the frequency response drastically increases in volume topping off at 30Hz at about 20dB louder than our ideal. Having the greatest volume around 30Hz gives the headset that rumbling sensation, but honestly not terribly much musically happens that low, which helps keep the bass emphasis less insane sounding than the chart makes it look. It’s still too loud relative to the other frequencies.

In the mids, the WH-XB910N under-emphasizes between 200Hz and 1000Hz, meaning a lot of fundamentals will sound comparatively quiet. The highs are imperfect, but as this is all relational—the approximately 5dB exaggerations between 1kHz and 2kHz and at 6kHz to 8kHz would probably make this headset seem trebly, if it weren’t for the cartoonish bass response. In reality, everything but the low end sounds kind of too quiet, but for some music it’s fun and for other music, it’s unpleasant. This directs us to the purpose of our target curve, which seeks to make everything sound more or less good.

Lows, mids, and highs

A woman faces slightly left looking at a laptop while wearing the Sony WH-XB910N.You’ll definitely want to alter the EQ for podcasts while you work.

Putting on 90s Australian indie band, The Clouds track, Souleater it’s immediately clear that the bass guitar and kick play too loudly. Rhythm guitar, snare, and hi-hat cymbals are audible, but largely overwhelmed by bass, trebly lead guitar, and the vocals.

Without EQ, the WH-XB910N makes you want to crank the volume to better hear everything besides bass.

Jodi Phillis and Trish Young’s vocals are at an okay volume, a little quiet but not horribly so, but their voices sound off. In the highs the WH-XB910N exaggerates where it shouldn’t and under-emphasizes where it should emphasize. Combine that with too much bass, and the singers just sound a bit muffled. At the bridge beginning at 1:25 when it’s just vocals, drums, bass guitar, and quiet guitar, the disproportionate bass is most obvious. The vocals and building tension ought to get highlighted here, but instead, the bass guitar and kick overwhelm everything.

Listening to the default settings of the WH-XB910N will make it very tempting to turn up your volume to hear everything else. Thankfully, there’s an EQ for that to save you from inflicting hearing damage. There’s nothing wrong with wanting some extra bass, but this frequency response is like ordering extra cheese on your pizza and getting so much cheese you can scarcely taste the toppings, sauce, or crust.

A chart showing how to EQ the Sony WH-XB910N to improve the sound.This one is a bit tricky to do in the app, given the equalizer’s limitations.

You should probably EQ the WH-XB910N. If it weren’t for the equalizer feature in the Sony Headphones Connect app, the default frequency response would make the WH-XB910N pretty limited in utility for all but the most dedicated bass heads. Fortunately, Sony includes two slots for custom EQ settings in addition to a slew of presets—many of which are also extremely bassy.

Because the default frequency response sounds wonky and the app’s equalizer has its limitations, you won’t manage to dial in the suggested EQ exactingly. To start with the EQ suggests turning down the 30-40Hz range by 25dB, while every slider in the app only turns up or down a maximum of 10dB in either direction. The equalizer itself has sliders for “Clear Bass,” 400Hz, 1kHz, 2.5kHz, 6.3kHz, and 16kHz. Some of these frequencies, you’ll notice don’t land exactly where you want to make adjustments.

My advice: turn down the “Clear Bass” last because Sony doesn’t label which frequencies specifically this slider affects, but it says “bass,” so you’ll probably want to reduce it significantly. Most of the EQ will be an approximation of our ideal, but try to keep alterations relative to each frequency slider. You’ll likely turn up the 16kHz a couple of decibels, and everything else down.

In any case, with the Headphones Connect app’s equalizer you won’t get this headset to perfectly match our suggestion, but it will sound much better even with an imperfect EQ. The equalizer transforms the WH-XB910N from unpleasantly bassy to decent.

How good is the microphone on the Sony WH-XB910N?

A chart shows the frequency response of the Sony WH-XB910N microphone performance.Deeper voices should sound pretty true to life, while high voices will definitely sound inaccurate.

The Sony WH-XB910N microphone suffers from the same problem as most mics that aren’t in front of the mouth—reduced high frequencies—consequently you might sound a little dull, or muffled, depending on your voice. While voices sound fine in ideal conditions, it struggles to attenuate noise caused by street sounds and wind. In the case of wind, the WH-XB910N can sometimes cut out your voice briefly when filtering out wind noise. Let us know what you think below.

Sony WH-XB910N microphone demo (Ideal):

Sony WH-XB910N microphone demo (Street):

Sony WH-XB910N microphone demo (Wind):

How does the microphone sound to you?

2 votes

Should you buy the Sony WH-XB910N?

A bust of The Terminator faces the camera head on wearing the Sony WH-XB910N.Bluetooth pairing with The Terminator’s eye is not successful, but it should pair easily to your device.

Anyone wondering if the Sony WH-XB910N is a Sony WH-1000XM4 killer, rest assured it is not. Whether you should pick up a pair comes down to your budget ($178 USD is not bad) and depending on if you like lots of bass. Yes, you can EQ a lot of the bass emphasis out, but it’ll never quite be perfect. Bass fans will likely really enjoy the cartoonish amount of low-end on tap.

The Sony WH-XB910N on a white background product photo.Sony WH-XB910N

All prices listed in USD unless otherwise specified. Prices may change over time, and vary by region. Unfortunately, we cannot list Amazon prices on the site, as they vary greatly by currency.

The headset is comfortable most of the time, which all the specs in the world can’t really tell you. Speaking of specs, the codec support on paper is better than average, but LDAC support is inconsistent, though the headphone jack is a nice option. The WH-XB910N mic does not impress us, but you could do worse. The touch controls are not my favorite, as it’s easy to accidentally trigger some and not trigger others when meaning to do so. When these work, they’re very convenient.

On the flip side, the ANC onboard the WH-XB910N handles blocking out your environment pretty well. So really the concessions you are willing to make will determine whether the Sony WH-XB910N is for you.

What should you get instead of the Sony WH-XB910N?

A photo of the Bose QuietComfort 45 resting atop a plastic head.
The market is pretty full of ANC headphones. If you want some of the best ANC out there, you have to pay more for the Sony WH-1000XM4 or the Bose QuietComfort 45. Incidentally, both will require some EQ, with the Bose getting really close to our target with the right settings. Noise cancelling is strong and both headsets feel comfortable. The WH-1000XM4 has the same codec selection as the WH-XB910N, while the QuietComfort 45 supports just SBC and AAC (along with wired playback).

Closer in price is the Sony WH-1000XM3, with comparable ANC to the WH-XB910N, but with an easier to tweak frequency response than the WH-XB910N. It uses aptX instead of LDAC, and of course AAC and SBC. Since the WH-1000XM4 came out the XM3 dropped to a more attractive price.

Maybe you’re wondering if we can recommend another bassy headset with ANC, so, yes check out the House of Marley Positive Vibrations XL ANC. It deviates from our ideal frequency response, but it does supply a good amount of bass, and surprisingly good noise cancellation. It fits differently than the WH-XB910N with more of a grip, and weighs a little more, with a sturdier aluminum ear cup construction.

Frequently asked questions about the Sony WH-XB910N?

Yes you can use the WH-XB910N like an ordinary pair of passive, wired headphones. Of course, you can’t modify EQ, use ANC or Ambient modes with it turned off, and you’ll be stuck with the passive frequency response, which is quite a bit different to the one you’ll get with the power on.

No, while both headphones share some features like app support, aesthetics, 360 Reality Audio, and codecs, the WH-XB910N does not sound as good. It’s also more cheaply constructed.

Leave a Reply

Your email address will not be published. Required fields are marked *