iPhone SE Teardown: 3D Touch Chip Removed, iPhone 8 Camera Sensor, and More
iFixit has published its full teardown of the new iPhone SE, confirming that the device has many similar or identical components as the iPhone 8, including the display, battery, cameras, Taptic Engine, SIM tray, and more.
From left to right: iPhone SE, iPhone 8, iPhone XR
While the new iPhone SE and the iPhone 8 have virtually identical display assemblies, Apple has removed the 3D Touch module from the iPhone SE. iFixit even tested the new iPhone SE with an iPhone 8 display and found that 3D Touch still did not work, suggesting that the feature is disabled at the software level on the device.
The teardown also confirms reports that the new iPhone SE has a 1,821 mAh battery capacity, identical to the iPhone 8.
The new iPhone SE appears to have the same 12-megapixel rear camera sensor as the iPhone 8, with the benefit of the A13 chip’s improved image signal processor, as Rene Ritchie mentioned earlier this month. The device’s front-facing 7-megapixel camera sensor also appears to be identical to the one in the iPhone 8.
While the new iPhone SE and the iPhone 8 have virtually identical display assemblies, Apple has removed the 3D Touch module from the iPhone SE. iFixit even tested the new iPhone SE with an iPhone 8 display and found that 3D Touch still did not work, suggesting that the feature is disabled at the software level on the device.
The teardown also confirms reports that the new iPhone SE has a 1,821 mAh battery capacity, identical to the iPhone 8.
The new iPhone SE has been available to order on Apple.com since April 17 and began arriving to customers on April 24. Pricing starts at $399 for 64GB of storage, with 128GB and 256GB options available for $449 and $549 respectively.
